CLEANING AND MAINTENANCE:
Resistant to water and detergents. Cleaning should be done periodically with a soft cloth that does not release fibers. If you choose to use a neutral cleaning liquid, it should be rinsed with cold water and dried to remove excess moisture. Stubborn dirt can be removed with suitable slightly abrasive cleaning agents.
The use of steel wool, abrasive products or strippers as well as strong acids (hydrochloric and perchloric) is not recommended. , strong bases (caustic soda or ammonia) or carbonated solutions. Citric acid should also not be used, as it dissolves the protective oxide layer on the surface of the aluminum. Waxes, Vaseline, lanolin or similar are not suitable. Solvents with haloalkanes (hydrofluoroethers or chlorinated solvents) and setting accelerators containing chlorides should be avoided (use accelerators without chlorides).
MATERIALS:
Aluminum: The base is a profile manufactured by aluminum extrusion. The matte silver finish is anodized, improving its corrosion resistance, mechanical resistance and appearance through this process. Aluminum is a material with excellent chemical and physical-mechanical properties. It is light, tenacious, ductile, malleable and highly durable.
Anti-slip band: The band is composed of aluminum oxide on a 0.1 mm PVC support. It resists outdoors, withstands water and engine oil and has a certified slip resistance under the DIN51130 test of R13, the highest in the range. The non-slip strip helps comply with the Accessibility Guide in the building.
DIMENSIONS:
height: 2.5 mm
width: 42 mm
